Your Cart is Empty

The Goggle Roll-Off System Revolutionized

The Ripper is a revolutionary system for the Roll-Off Goggle. With the press of the wireless handlebar button, The Ripper rapidly pulls the cord on most roll-off systems to clear the riders vision in less than a second.

Automated Goggle Roll-Off System

The Ripper by Risk Racing

The Ripper

The wireless main unit replaces the need to take your hand off the handlebar to reach up and pull the cord on the roll-off system. Not only is this safer, but faster, and means you're free to clear your vision whenever you NEED to!

The Ripper by Risk Racing

Wireless Handlebar Remote

The remote sits conveniently next to your grip, allowing easy access to press the button.

The Ripper by Risk Racing

Rapid Visibility

With a tap of the button, the arm pulls the cord in a rapid-fire motion, clearing vision in less than 1 second*

The Ripper by Risk Racing

Keep Your Hand on the Bar

With the Ripper you no longer need to take your hand off the the handlebar to clear your vision!

The RIPPER clear vision fast in the muddiest conditions!

Quick Setup

It takes minutes to setup the Ripper and operation is as easy as pushing a button.

The Ripper by Risk Racing

Mount to strap

Feed the strap through the strap mounts, then slide the Ripper forward until it touches the back of the roll-off canister.

The Ripper by Risk Racing

Hook Pull Arm

Pull out the pull-cord and hook the Ripper pull arm over the cord.

The Ripper by Risk Racing

Set Mode

Turn on the unit then quick press the sync button to change between Auto-Burst or Momentary/Continuous mode.

The Ripper by Risk Racing

Mount Remote

Place wireless remote button in desired location, then screw back mount and tighten down.

The Ripper by Risk Racing

Manual Override

The pull cord is still operational even when The Ripper is attached.

The Ripper by Risk Racing

Sync Multiple Remotes

Sync the Ripper to multiple Wireless Remotes for multiple bike setups.
Extra buttons available

The Ripper by Risk Racing

Universal Mount

Universal goggle strap mount works with your favorite goggle roll-off system*.

The RIPPER clear vision fast in the muddiest conditions!


Risk Racing Ripper Modes


Press Remote button to activate the Ripper for approx 1.5 seconds. Use this mode to clear vision automatically with a tap of the button.


Press & HOLD Remote button to activate the Ripper for desired time (up to 5 seconds). Use this mode to have more control of roll usage.

The Ripper by Risk Racing


The Ripper will typically last up to 10 rolls before needing to be recharged via the micro-USB port on the main unit. Battery level is indicated by the 3 LEDs

The Ripper by Risk Racing


At only 4.1oz (116g) it's lighter than the typical action camera setup and almost half the weight once you include action camera mounting hardware.

The Ripper - Universal Electronic Goggle Roll-Off System by Risk Racing


  • Clear goggles in as little as 1 second
  • No more taking hands off handlebar to clear roll-off
  • Use almost any roll-off goggle*
  • Manual override incase of mechanical failure or damage
  • Quick set up
  • Auto-Burst Mode or Momentary/Continuous Mode
  • Sync multiple Rippers to one remote for quick change in race situation
  • Micro-USB rechargeable
  • Battery life lasts up to 10 rolls
  • Weather Proof
  • Lightweight at only 4.1oz (116g)

What's Included

The Ripper by Risk Racing
In the Box
  • The Ripper
  • Wireless Handlebar Remote
  • Instruction Sheet

Unboxing Video


Lock-N-Load Pro Additional Mounting Plate
Wireless Handlebar Remote
Risk Racing Ripper replacement Pull/Arm Assembly + Drive Gear
Replacement Pull Arm/Gear Assembly

  • The Ripper
  • Handlebar Mount Wireless Remote
  • RF wireless transmission
  • Micro Motor
  • Strap Mount accomodates straps up to height of 2 inches (50mm)
  • Modes
    • Auto-Burst Mode
    • Momentary/Continuous Mode
  • Ripper Main Unit Battery
    • Lithium-ion Rechargeable Battery Pack (Integrated)
    • 3 LEDs = 100%, 2 LEDs = 66%, 1 LED = 33%, Blinking LED <10%
    • Battery Life: Up to 10 full rolls
  • Remote Battery
    • CR2032 Lithium Battery (replaceable)
  • Dimensions
    • The Ripper
      • Size: 4.4” x 1.5” x 2.75” (11.2cm x 3.8cm x 7cm)
      • Main Unit Weight: 4.1oz (116g)
    • Handlebar Remote
      • Size: 1.5” x 1.7” x 1.9” (3.9cm x 4.4cm x 4.7cm)
      • Weight: 0.6oz (17g)
  • Model# 00395
  • 1 year warranty

Will it fit my roll-off goggles?
We have designed the Ripper to fit as many roll-off systems as possible. Please see the compatibility tab for a full list of tested units.
If you do not see your goggle please Conact Us for confirmation

Confirmed Roll-Off Goggle Compatibile:
  • 100% Accuri Forecast
  • 100% Strata SVS
  • 100% Youth Accuri Forecast
  • 100% Youth Strata SVS
  • EKS Zip Off
  • Fly Racing Goggle Roll-Off System
  • Fox Air Defence
  • Fox Vue
  • Leatt 5.5 Roll-Off System
  • Leatt 6.5 Roll-Off System
  • Rip N Roll Platinum
  • Rip N Roll Colossus
  • Rip N Roll Hybrid
  • Scott Fury
  • Scott Hustle X
  • Scott Split OTG WFS
  • Scott Youth Buzz Works
  • Smith Roll Offs Kit
  • THOR Sniper with Total Vision System

  • Scott Prospect Frame
  • Oakley Airbrake

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.